Dry Ironing - Fakir BS 1000 Instrucciones De Uso

2
1
D
E
Operation and use
Steam ironing
• Generator start-up (page 13).
• Steam ironing is possible when the fabric knob [2] is
facing the cotton-linen position.
• The iron on warning light [9] shows that the iron is war-
9
ming up. Wait a few ninutes until the light switches off.
• Press the button [1] to give steam.
• Each time the appliance is used, a few drops of water
may come out when the steam button [1] is pressed
F
This is quite normal and is due to the condensate which
forms inside the cold tube. The same may happen
when the iron has not been used for some time.
• The desired volume of steam is adjusted using the con-
troller [13]:
less steam
more steam = turn to the right
The steam button [1] also has a continuous steam
mode. To use the continuous mode push the steam
button [F] further down, the button is locked in the
contiuous mode. Use a light touch to unlock the
button and the functions are deactivated.
• The steam can be used to remove shiny patches and to
freshen clothing, wool fabrics, curtains etc. [15].

Dry ironing

12
• The iron also be used in the traditional way, without
15
steam [16].
The iron heats up independently from the generator.
• Switch on the appliance at the function selector [12] -
Pos. [E].
• Adjust the fabric knob [2] to the fabric position required.
• The iron on warning light [9] shows that the iron is war-
ming up. Wait a few minutes until the light switches off.
15
= turn to the left
15