Tabla de contenido
Publicidad
32
monty 3300 RACING AT
5.0 Mounting and demounting.
General precautions
CAUTION:
BEFORE MOUNTING A TIRE ON A RIM ENSURE
THE FOLLOWING RULES ARE OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
CONDITION: IF NECESSARY CLEAN AFTER
REMOVING ALL WHEEL-WEIGHTS INCLUDING
'TAPE WEIGHTS' INSIDE THE RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH
NO DAMAGE TO THE BEAD AND THE CASING.
C- REPLACE THE RUBBER VALVE STEM WITH A
NEW ONE OR REPLACE THE 'O' RING IF THE
VALVE STEM IS MADE OF METAL.
D- DO NOT USE THIS TIRE CHANGER TO
OPERATE TUBE TYPE WHEEL.
E- LUBRICATION IS NECESSARY FOR CORRECT
MOUNTING OF THE TIRE AND PROPER
CENTERING. USE ONLY AN APPROVED
LUBRICANT FOR TIRES.
F- MAKE SURE THE TIRE IS THE CORRECT SIZE
FOR THE RIM.
Operator's Manual
USA - CANADA
Publicidad
Tabla de contenido
