Status Lights; Cycles - Sears Kenmore ELITE Oasis HE 110.2706 Manual De Uso Y Cuidado

Status Lights

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add other garments
to the wash load.
Clothes Clean
The Clothes Clean light stays on until the lid is opened or the
Power button is pressed.
Lid Lock
When the Lid Lock status light glows, the washer lid is locked.
NOTE: You must wait until the Lid Lock light turns off before the
lid can be opened.
Indicator lights
An indicator light shows which Cycle, Modifiers and Options you
have selected.
Estimated Time Remaining
Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
NOTES:
I The time is an estimation only and may vary depending on
load size, cycle, modifiers and options selected.
I
You may notice the time adjusting during the cycle. This is
normal.
I The cycle time may be extended if oversudsing occurs or the
load is unbalanced.

Cycles

Turn the knob to choose the right wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow. If the default settings for the
Modifiers and Options are suitable for your wash load, you may
press Start to begin the wash cycle.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see following chart).
3. Press START. The wash cycle will begin.
Preset Cycle Settings
Cycle Preset
Minutes
Whitest Whites 79
Heavy Duty 74
Normal 43
Casual/Wrinkle Free 44
Express Wash 34
Bulky/Bedding 46
Sheets/Towels 46
Darks/Colors 42
Delicate/Handwash 35
Rinse & Spin 20
Drain & Spin 10
Clean Washer 60
* Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
NOTE: Load only to the top of the basket. Overloading can cause
poor cleaning. See "Starting Your Washer."
Soil Wash/Rinse
Level* Temp
Heavy Hot/Cold
(No ATC)
Heavy Hot/Cold
(No ATC)
Normal Warm/Cold
Medium Warm/Cold
Light
Light Warm/Warm
Normal Warm/Cold
Normal Warm/Cold
Normal Cool/Cold
Light Cool/Cold
Not Cold/Cold
applicable
Not Not
applicable applicable
Not Not
applicable applicable
15