Technical Specifications - ECG RB 040 Manual De Instrucciones

4. To tune in to a station stored in memory press repeatedly 7
(P+) or 3 (P-) until the desired station is tuned in.
Sleep mode with music (SLEEP)
While the radio is on, press 1 (SNOOZE/SLEEP/DIM) to go in the sleep
mode with music (SLEEP). First, the display shows "OFF" (off mode).
Press repeatedly 1 (SNOOZE/SLEEP/DIM) to set the.time when the
radio will be turned off. The SLEEP function range is 10 to 90 minutes.
Nap mode (NAP)
You can set the interval "nap" after which the radio automatically
turns on.
MAINTENANCE AND CLEANING OF THE DEVICE
Unplug the device before cleaning.
• Place the device on a flat surface protected from direct sunlight
or excessive heat and humidity.
• Protect glossy furniture or furniture made of wood using
a tablecloth or other protective materials between the furniture
and the device.
• If the unit is not used for longer period, remove the batteries to
prevent leakage and subsequent corrosion.

TECHNICAL SPECIFICATIONS

Model
Power
Radio stations memory
Power input
Dimensions and weight
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand
over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts
on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to
your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
1. While the radio is turned off, press and hold for about 4 seconds
the button 2 (ON/OFF/NAP) and the display with the indicator
D (FM) starts flashing.
2. Using buttons 7 (P+) and 3 (P-) set the required nap time (45,
60, 90 or 120 minutes).
3. Confirm the setting by pressing 2 (ON/OFF/NAP).
Dimming the brightness of the display (DIM)
While the radio is off and the display shows current time you can press
1 (SNOOZE/SLEEP/DIM) to change the intensity of the brightness of
the display.
• Clean the surface of the device with a soft, dry cloth or lightly
moistened with a mild detergent solution. Prevent moisture
penetrating the device.
• Do not use cleaning agents containing alcohol, ammonia or
abrasive ingredients.
RB 040
AC 230 V ~50 Hz
Backup battery: 2× AAA (not included)
20 pre-sets
5 W
370 g, 155 × 60 × 55 mm (w × h × d)
GB
08/05
21