Special Functions; Cleaning; Troubleshooting - Clatronic MWG 789 H Instrucciones De Servicio

Horno microondas con parrilla y aire caliente
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
NOTE:
The change of program is indicated by an acoustic signal.
When grilling, several signal sounds will alert you to turn food such
as meat or sausages after half of the time has elapsed.
The auto functions and the convection mode with pre-heating may
not be used for gradual cooking.

Special Functions

Locking (Child-proof lock)
Press and hold the
button for more than 3 seconds to lock the
device. The display will show the locked setting. The functions of the
controls are blocked. Press and hold the
3 seconds to unlock.
Display function
If you press the
button during microwave, grilling, combination
or convection operation (without preheating), the mode or tempera-
ture setting is displayed for 2 - 3 seconds.
In disregard to the operation mode, the display will be showing the
current time for 2-3 seconds when pressing the
assumes that the time has been set previously.
Timer
When the appliance is not in use, you can use this setting as timer
function:
1. Press the
button two times.
2. Use the turning knob to set the time as desired.
3. Press the
button to start the timer.
5 beeps will indicate that the time has elapsed. Then the display will
show the current clock time again, provided it has been set previously.

Cleaning

WARNING:
Turn the microwave off and remove the mains plug.
Malfunctions are often just caused due to minor problems. Before contacting our customer service, please check the table below:
Problem
Radio or TV reception is interrupted during
microwave operation.
The device is not supplied with electricity;
the display is black..
The display shows "0:00".
The device does not start operation. The
display shows a readout other than the
current time.
All controls are locked.
64
Interior
button again for more than
External Walls
button. This
Accessories
Odor
Oven lights

Troubleshooting

Possible cause
The electromagnetic fields of this device might
interfere with the pictures and sound of special
frequencies.
Defect wall socket.
There was a power failure.
The door is not properly closed.
The
button was not pressed after selecting
the function.
The child-proof lock is activated.
CAUTION:
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Do not use a metal scraper to clean the viewing window. The
surface could be scratched and the glass could possibly break.
Keep the interior of the oven clean. Splashes and overflowing
liquids on the walls of the oven can be removed with a damp cloth.
If the oven is very dirty a mild detergent can also be used.
Wipe off the viewing window on the inside and outside with a damp
cloth and remove splashes and stains from overflowing liquids regu-
larly.
The external walls of the microwave should only be cleaned with a
damp cloth. Please ensure that no water enters the openings in the
housing and therefore inside the device.
Open the microwave door before cleaning the control panel in order
to avoid accidentally switching on the appliance.
Clean the glass rotating plate in warm soapy water or in the dish-
washer. Dry before reinstalling it inside the microwave.
Regularly clean the guide ring and the inside of the bottom. You
may remove the guide ring and manually clean it. Use a mild deter-
gent or glass cleaner. Dry thoroughly. Make sure to position the ring
properly afterwards.
Clean the grill after each use with a dishwashing detergent or place
it in a dishwasher for cleaning.
Clean the pizza plate after each use by hand using a dishwashing
detergent. Dry before reinstallation or storage.
In order to remove unpleasant odor in the microwave, place a bowl
suitable for microwave use filled with water and lemon juice in the
device and heat for approx. 5 minutes. Then wipe the oven with a
soft cloth.
Please contact a service center for replacing the oven lights.
Notes / solution
This is normal and not a malfunction. Position the
devices further away from each other.
Try another wall socket
Check the main fuse in your household.
Set the clock again.
Check if there are objects or food remains jammed
in the door.
Press the
button, or press the
cancel the function.
Press and hold the
3 seconds to unlock.
button to
button for more than

Publicidad

Tabla de contenido
loading

Tabla de contenido