After Use - Koenic KSI 4310 Manual De Instrucciones

After Use

Fig. Unplug the power plug from the power
14
outlet.
Put the iron back onto its stand base.
Fig.
15
Let the product cool down.
Automatic Switch-off
This product switches off automatically
if it has not been used for a certain
period of time. Once the product is
moved again, it switches itself on again.
• Horizontal position
If the product is sitting on its
soleplate and is not moved for
30 seconds, it switches off
automatically.
• Vertical position
This product switches off after
approx. 8 minutes, if it is on its stand
base and is not in used.
Note
The indicator light starts to flash.
Cleaning and care
• Put the steam control on the
• Unplug from the power outlet and let the
product cool down.
• Rinse off the calcium particles and other
deposits from the soleplate with a damp
cloth and some detergent.
• Clean the upper part of the iron with a damp
cloth.
• Rinse out the water tank regularly with
clear water and then empty it.
• Keep the product upright in a safe and dry
place.
Note
In order to keep the soleplate smooth, it should
not come into contact with metal objects.
Caution
Do not use any abrasive sponges, vinegar
or other chemicals in order to clean the
soleplate.
IM_KSI 4310_180620_V01_HR.indb 19
Self clean function
The self clean function cleans the product of
impurities. Cleaning with the self clean system
should be carried out as follows before the first
use, after longer periods of disuse or every 10
to 15 days:
Fig. Unplug the power plug from the power
16
outlet.
Fig.
Put the steam control knob to the
17
Position.
Fig.
Fill the water tank to the max mark.
18
Fig.
Put the product onto its stand base.
19
Fig. Connect the power plug to a suitable
20
power outlet.
Fig. Set iron to the maximum temperature.
21
Disconnect from the power outlet as
soon as the temperature control light
turns to green.
Fig. Hold the device in a horizontal position
22
over a sink. Press on SELF CLEAN and
continue pressing.
Gently move the device back and forth
Fig.
23
until damp and hot water cease to
escape.
Fig. Shake out any remaining water out
Position.
24
of the water fill opening. Once the
soleplate has cooled down, it can be
cleaned with a damp cloth.
Do not put any vinegar or other decalcifying
agents into the water tank.
Caution
English
19
20/6/18 5:53 pm