System Settings - Dino-Lite AMK4012T-D15 Manual De Usuario

2. Frame Rate: Press"
enter. Press" "/"
& exit.
3. Video Segment Sizes: Press "
then press " " to enter. Press "
MIN". Press " " to confirm & exit.
4. Overwrite: Press "
Press " "/" " to select "Off"/ "On", and press "
"Overwrite" is on, DVR will cycle record, and save the latest video.
5. Time Stamp: Press "
enter. Press " "/"
exit. If it's on, video will be saved with synchronous time.
6. Information Display:Press "
press " " to enter. Press "
confirm & exit. If it's on, screen will display information of working frequency,
channel, audio state, date & time, etc. If you select "Off", no information will
be displayed.
7. Video Setting: Press "
enter. Press " "/"
to enter; then press "
exit

System Settings

Power DVR on, working mode switched to "
function & system setting. Press "
" to enter into system menu.
1. Date time: Press "
Press " " again to move the cursor, and press "
time. Press " " to exit.
Page 8
"/" " to select "Frame Rate" and press "
"to select "30 FPS"/"25 FPS", and press "
"/"
"/"
"/" " to select " Overwrite", and press "
"/" " to select "Time Stamp", and press "
" to select "Off"/ "On", and press "
"/"
"/" " to select "Off"/ "On", and press "
"/" " to select "Video Setting", and press "
" to select "Brightness" or "Contrast"; then press "
"/" " to adjust brightness or contrast. Press "
"/"
"/" " to select "Date Time", and press "
" to select "Video Segment Sizes",
" to select "10 MIN"/"30MIN"/"60
" to confirm & exit. If
" to select "Information Display", and
", press "
"/"
" to select "System"; then press "
"/"
" to
" to confirm
" to enter.
" to
" to confirm &
" to enter into
" to enter.
" to adjust date &
AMK4012-D15 manual
" to
" to
"
" to