Lithium­iOn Battery Status Display - Hilti TE 6-A22 Manual De Usario

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a cordless rotary hammer drill. It is designed for drilling in steel, wood and masonry,
for hammer-action drilling in concrete and masonry, and for driving and removing screws. The product can
also be used for light chiseling work on masonry and surface finishing on concrete.
▶ Use only Hilti lithium­ion batteries of the B 22 series with this product.
▶ Use only the Hilti lithium-ion batteries from the B22 series for this product.
3.3 Lithium­ion battery status display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED blinks.
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
18 English
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
Dust shield
chuck
Insert tool unlocking device
Depth gauge
Function selector switch
Forward / reverse selector switch with safety
lock
Control switch
Grip
Battery release buttons
Charge status and fault display (Li-ion bat-
tery)
Battery
Connection for the TE DRS-6-A(02) dust re-
moval module
Side handle
Light to illuminate the work area
2267485
*2267485*