Cleaning; Storage - Profi Cook PC-AE 1070 Instrucciones De Servicio

Stop Operation And Disassembly
1. Press the button. Wait until the appliance
comes to a complete stop.
2. Disconnect from mains power supply.
3. Take the juice jug to the side and open the
safety bracket.
4. Remove the transparent cover.
WARNING:
• Before cleaning always disconnect from mains power supply.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
• Do not leave the pulp to dry on the centrifugal
sieve. The fine pores will clog and become
useless.
Tip
• Remove residues in the centrifugal sieve
immediately under running water. Use a dish-
washing brush.
• For cleaning the outside of the machine use
only a damp washing-up cloth.
44
5. Remove the centrifugal sieve with the
centrifuge casing. Use both hands to lift the
centrifuge casing up.
WARNING RISK OF CUTS! THE CEN-
TRIFUGAL SIEVE HAS SHARP KNIVES!
ONLY LIFT IT ON THE OUTER EDGE.
6. Lift the centrifugal sieve out of the centrifuge
casing.

Cleaning

Plunger, Transparent Cover, Centrifuge Sieve,
Centrifuge Housing, Juice/Pulp Container
WARNING IN REGARD TO RISK OF
CUTS! THE CENTRIFUGE SIEVE IS SHARP!
• Clean these components in a rinsing bath.
• Clean the centrifugal sieve with a dishwashing
brush. See Figure.
• Rinse with clean water.
• Clean the device as described. Let the acces-
sories dry completely.
• We recommend that you store the device in its
original packaging when it is not to be used for
a longer period.
• Always store the device at a well ventilated and
dry place outside the reach of children.

Storage