H.Koenig WIZ400 Manual De Instrucciones página 7

Refill water during operation
1. No need to plug out when adding the water.
2. Turn the water injection hole cover anticlockwise.
3. Use the measuring cup to refill a suitable quantity of cold or hot water into the tank.
4. Re-install the water injection hole cover clockwise.
After the machine is used
1. After the cleaning machine is used, unplug the power cord and disconnect the power
supply.
2. Turn the water injection hole cover anticlockwise, and turn it down.
3. Empty the residual water in the tank and clean the external surface with a piece of dry
cloth.
4. At last, re-install the water injection hole cover on the the machine body and tighten it in
position.
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and
electronic products contain hazardous substances that have harmful effects on the
environment or human health and should be recycled. The symbol here indicates that
electrical and electronic equipment should be chosen carefully, a wheeled waste container
is marked with a cross.
Manufactured and imported : Adeva SAS 8 rue Marc Seguin 77290 Mitry-Mory FRANCE
www.hkoenig.com - contact@hkoenig.com - Tel 01 64 67 00 01