Publicidad
Enlaces rápidos
ASSEMBLY INSTRUCTIONS
SUPPLIED MATERIAL
Gloves / Guantes / Handschuhe
1
2
Lamp structure / Estructura lumi n aria / Leuchten-Struktur
Glass / Vidrio / Glas
3
TECHNICAL SPECIFICATIONS
Quadra Ice Flat
Design by Proli Diffusion Studio
INSTRUCCIONES DE MONTAJE
MATERIAL SUMINISTRADO
1.
ESPECIFICACIONES TÉCNICAS
MONTAGEANLEITUNG
GELIEFERTES MATERIAL
2.
1127
1 un.
1 un.
1 un.
3.
TECHNISCHE DATEN
Publicidad
Resumen de contenidos para VIBIA Quadra Ice Flat
- Página 1 Quadra Ice Flat Design by Proli Diffusion Studio ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG SUPPLIED MATERIAL MATERIAL SUMINISTRADO GELIEFERTES MATERIAL 1127 1 un. Gloves / Guantes / Handschuhe 1 un. Lamp structure / Estructura lumi n aria / Leuchten-Struktur 1 un.
- Página 2 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG IMPORTANT NOTICE: Switch of the mains before installing the lamp. 1. Pull the tab to open the plaque (A). IMPORTANT NOTE: Not touch the LED plaque. 2. After running the cable from your power supply through the opening in the plate (B), fix the plate to the ceiling using suitable screws and plugs (not supplied).
- Página 3 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG 3. Connect the light fitting to the mains power supply at the terminal block (C) as follows: Dimmable 1-10V: Connect terminal N and T/T at the terminals as shown, while connecting the line running through the dimmer in your installation at terminal L.
- Página 4 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE MONTAJE MONTAGEANLEITUNG 4. Close the paque (A), it´s fixed with on assembled magnet. 5. Assemble the glass (D) by pulling out 4 springs (E) to be placed about the glass corners. 4. Cerrar la placa (A), queda asegurada mediante un imán montado.