Serial Numbers; Product Cleaning - Peg-Perego Viaggio 2-3 Shuttle Instrucciones De Uso

loop can be used. To remove the loop
from its location under the fabric of the
seat, follow the instructions below.
14• Remove the strap from the loop
under the car seat.
15• Extend the strap for the shoulder
loop by pressing the button located
behind the car seat (1) and pulling it
upwards (2).
16• Insert the seat belt into the shoulder
loop (as in the box), then lower the
shoulder loop (1) by pulling the belt (2).
17• The correct height of the shoulder
loop is just above the shoulder level.
How to remove the fabric
lining
The fabric seat of the Viaggio 2-3
Shuttle can be removed for cleaning.
The armrests are not removable.
18• Follow the washing instructions
on the packaging label (shown in the
figure).
19• Unhook the two eyelets from the
buttons on the sides of the car seat
base.
20• Release the two hooks from the
seat base.
Maintenance and cleaning
of the fabric lining
Brush the fabric parts to remove dust.
• Follow the washing instructions on
the label sewn onto the seat's lining
(fig. 18).
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
Repositioning the car
seat cover:
21• Fit the cover from the front of the
car seat by inserting it into its housing
(fig_a); insert the two hooks of the seat
in the appropriate holes near the rear
of the car seat (fig_b).
22• Hook the two side slots to the
buttons on the sides.
Transport
23• Viaggio 2-3 Shuttle is easily carried
using a handy transport handle.

Serial numbers

24• On its underside, Viaggio 2-3
Shuttle contains information about its
product name, production date and
serial number, along with its orange
certification label.

Product cleaning

This product requires minimal
maintenance.
• Cleaning and maintenance must
only be carried out by adults.
• It is advisable to keep all the
moving parts clean.
• Clean the plastic parts periodically
with a damp cloth. Do not use
solvents or similar substances.
• Brush the fabric parts to remove
dust or clean following the
instructions provided
dedicated section.
• Do not clean polystyrene parts
23
in the