Step 2 Attach Top Wire Guard; Step 3 Attach Dome To Emitter; Step 4 Attach Dome Cap - Charmglow 82300 Manual Del Usuario

7
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 2–Attach Top Wire Guard
Line up 4 prongs on Wire Guard Bottom with 4 holes on Emitter Bottom,
and Insert .
Note: It may be necessary to adjust the prongs slightly to line them up
with the holes .
Step 3–Attach Dome to Emitter
Line up three studs in Emitter with holes in Dome . Slide Dome carefully
over studs, clamping Top Wire Guard securely in place .
Note: It may be necessary to adjust prongs of the Top Wire Guard
slightly to provide a secure fit .
Install (3) Nuts on studs and tighten with 7/6" wrench .
Do not over tighten .
Step 4–Attach Dome Cap
Lay Dome Cap on dome covering 3 Nuts and line up center holes .
Insert threaded end of Finial through cap and screw into center of dome
until secure .
Owner's manual: model 82300 portable outdoor heater