Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
o
ncj
n ncj
r
5, Wash any dirt or other material from the debris filter. Make sure
the drain pump propeller behind the debris filter is not blocked.
6, To assemble the filter cap, align the projected part of the filter cap
to your 12 o'clock (on an imaginary clock) and turn it clockwise.
2, Replace the debris filter cap.
8, Replace the filter cover.
CLEANING
THE DOOR SEAL/BELLOW
1. Open the washer door and remove any clothing or items from the washer.
Inspect the gray colored seal/bellow between the door
opening and the basket for stained areas. Pull back the
seal/bellow to inspect all areas under the seal/bellow and to
check for foreign objects.
seal/bellow
3, If stained areas are found, wipe down these areas of the seal/bellow, using the procedure
that follows.
a) Mix a dilute solution, using 3_ cup (177 mL) of liquid chlorine bleach, and 1 gal. (3.8 L) of
warm tap water.
b) Wipe the seal/bellow area with the dilute solution, using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the washer interior air dry with door
open.
_
IMPORTANT:
Wear rubber gloves when cleaning for prolonged periods.
Refer to the bleach manufacturer's instructions for proper use.
PRESERVING
THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washer. Keep them on the purchased
pedestal or in a separate storage box.
_This
may
or damage
top cover,
are dangers
drop.
scratch
the
And there
for
CAUTION
_
ince the entire washer has a high-gloss finish, the surface can be scratched or damaged. Therefore,
avoid scratching or damaging the surface when using the washer.
26 ceanng
and maintain ng your washer
WF409ANW-02657D-02
EN.indd
26
2009-12-04
;._.,2ti_11:19:46
Publicidad
Tabla de contenido
