Network Connection; Connecting To A Wireless Network; Connecting To A Wired Network - Hitachi M32N1 Guia Del Usuario

Remote control
C.C. Press to set Closed Caption to "CC Off", "On When
Mute" or "CC On".
(Previous) Press to select the previous chapter
(Stop) Press to stop viewing.
(Play) Press to start viewing.
(Next) Press to select the next chapter.
Press to rewind.
(Pause) Press to pause or resume viewing.
Press to fast forward.

Network Connection

To access the Internet from this TV, you must separately subscribe to high speed broadband Internet
service with your Internet Service Provider.
Your TV is internet-ready and can be connected to your home network in two ways:
• Wired, using the LAN (RJ45) input located on the back of the TV.
• Wireless, using a router capable of broadcasting a high-speed wireless signal.
Caution:
This wireless appliance complies with FCC radiation limits set forth for an uncontrolled environment.
Install and operate with a minimum of 8 inches between it and your body.

Connecting to a wireless network

To connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless
signal.
• A high-speed internet connection.
2. Use the Network menu to configure the TV.

Connecting to a wired network

To connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV.
• A router or modem with an available Ethernet
port.
• A high speed internet connection.
2. Connect your Ethernet cable to the router or
modem and to the LAN port on the back of the
TV.
3. Use the Network menu to configure the TV.
(continued)
INTERNET
EN 11