Playing Audio From A Bluetooth Device; Playing Audio From An External Device - Denon Professional DN-350MP Manual De Instrucciones

Playing Audio from a Bluetooth Device

To play Bluetooth Tracks:
1. If the unit is off, press the Power button to power it on.
2. Connect the Bluetooth remote antenna to the BNC connector.
3. Press the BT/USB/AUX button to cycle through to select Bluetooth.
4. Navigate to your Bluetooth device's setup screen, find "DN-350MP" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
In Bluetooth mode, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To pause playback, press the Stop button.
•
To remove the list of paired devices and disconnect from any currently paired
device, press the Menu button use the Select knob to scroll and select Bluetooth
Device Clear to remove all paired devices from the unit's memory (and also unpair from
a currently paired device). After the devices have been cleared from the unit's memory, to
connect again to the same device, go to your Bluetooth device and select "Unpair" or
"Forget the Device", depending on the type of device that you have. You can then select
DN-350MP from your list of Bluetooth devices and connect.

Playing Audio from an External Device

To play audio on an external device (e.g., smartphone, computer, portable music player,
etc.) connected to the Aux In:
1. If the unit is off, press the Power button to power it on.
2. Connect the 1/8" (3.5 mm) stereo/headphone output of your external device to the Aux
In.
3. Press the BT/USB/AUX button and select Aux as the media type. If your external device
is connected, Aux Connected will appear in the display. If your external device is not
connected, Aux Disconnect will appear in the display.
4. To start playback, press the Play button on your external device.
10