Setting Up The Vcr - Insignia NS-H3005 Guia Del Usuario

Insignia NS-H3005 Home Theater System
3 Close the ferrite core. You should hear a
click.
Note
Attach the ferrite core as close to the home theater system as
possible.
Locating the speakers
For a normal setup, use six speakers (two front
speakers, one center speaker, two rear speakers
and a subwoofer).
Center speaker
Subwoofer
Front speaker
(left)
Rear speaker
(left)
Speaker location example
Front speakers
From your listening position, place the
speakers an equal distance away and with an
angle of 45° between speakers.
Center speaker
The center speakers and front speakers
should be at the same height. Place the
center speaker above or below the television
as shown.
Rear speakers
Place left and right rear speakers behind the
listening area. These speakers recreate
sound motion and atmosphere required for
surround sound playback. For best results,
do not install the rear speakers too far behind
the listening position and install them at or
above the level of the listener's ears. It is also
effective to direct the rear speakers towards a
wall or ceiling to further disperse the sound.
For a smaller room size, if the audience is
near the back wall, place the rear speakers
opposite each other, and 24 - 36 inches
above the listeners' ears.
Subwoofer
If you want to hear excellent bass sound or
Dolby Digital surround, you should connect a
subwoofer. Place the subwoofer in any front
position.
Connect the
ferrite core as
close as
possible
Front speaker
(right)
Rear speaker
(right)
www.insignia-products.com

Setting up the VCR

Using the On-Screen Display (OSD)
Some of these functions appear during VCR
operation.
1
2
3
Display
1 Function
2 Tape speed
3 Date
4 Hi-Fi
5 Channel
6 Stereo/SAP
7 Clock/Count/Remain
Press MEMORY/ENTER to change the
television on-screen displays.
Note
• The function displays remain on the television screen for
five seconds.
• The clock, tape counter, and tape remaining information
continue to be shown until you press MEMORY/ENTER.
• The tape counter and the remaining tape length indicator
appear only when a tape is inserted. Also, the remaining
tape length indicator appears after any tape operation.
Getting easy information
If Extended Data Service (XDS) signals are
provided along with normal television signal in
your area or during playback of a tape recorded
with Extended Data Service (XDS) signals, the
station ID, program title, and program details are
shown on the television screen.
When viewing a channel with Extended Data
Service (XDS) signals, press MEMORY/ENTER
and the station ID appears on the television
screen. Press MEMORY/ENTER again and the
program details appear on the television screen.
When viewing a tape recorded with Extended
Data Service (XDS) signals, press
MEMORY/ENTER twice and the program title
and program details appear on the television
screen.
4
5
6
7
Description
Indicates the function in progress.
Shows the current tape speed.
Shows the current date.
(Month/Date/Day of the week format)
Indicates the VCR is playing back
tape recorded in Hi-Fi.
Indicates the selected channel or
LINE1 or LINE2.
Shows the type of audio signal
received by the VCR tuner.
NOTE: MONO is not displayed.
Shows the current time, the tape
counter, and remaining time on the
tape.
11