Connecting A Computer (Host) To The Tv Explorer; Hd Atsc (Slave) - Promax TV EXPLORER HD ATSC Manual De Instrucciones

5.19.2

Connecting a computer (host) to the TV EXPLORER

(slave)
To connect a TV EXPLORER
drivers (if they are not installed yet) you have in the folder USB_DRIVERS, on the
memory support delivered with the instrument. To install drivers follow the steps
described in the manual.
Then you have to install the software NetUpdate3, which is also found in the
memory support delivered with your equipment. It allows connecting the TV EXPLORER
HD ATSC and to perform various functions such as create and edit plans, update
firmware, etc..
Once installed all the necessary software on your computer, connect the
TV EXPLORER HD
male) delivered with the equipment. After connecting, it appears an incon at the top of
the measurement screen (Figure 56 .-).
Run the program and make the connection with your equipment using the option
"Detect" on the program to access all the available features.
Page 78
HD
Figure 55.-
ATSC to the computer by using the CC-041 (mini USB male — USB
Figure 56.-
USER'S MANUAL. TV EXPLORER
ATSC with a computer, you should install the
HD ATSC
HD ATSC
12/2010