Briteq BTX-TITAN SIRIUS HRI 280 Manual De Instrucciones página 13

ENGLISH
MENU MAP – PART 2
MANUAL CONTROL
ADVANCED
SET UP DMX ADDRESS
Set the DMX address by pressing the center of the screen at least 2 seconds (yellow progress bar appears
on the screen) and DMX Address panel appears. DMX address can be modified with the slider on the touch
screen or with the "+" and "-" button. The ">>" icon set the last DMX address possible according to the
selected channel mode. The "<<" set the address to 1. Set the DMX address by pessing enter. The main
page is now updated, and the DMX range used by the product is on the right down corner of the screen.
SET UP CHANNEL MODE
Set the channel mode of BriteQ BTX-TITAN:
 Mode 1: 24 Channels
 Mode 2: 25 Channels
 Mode 3: 17 Channels
SET UP FIXTURE ID
The Fixture id (ranging from 0001 to 9999) makes installation easier because each product can be identified
by a unique number. With the internal battery, no need to plug the power to set or read the fixture id.
To change the fixture id a password is needed: the password is "1702".
BRITEQ
®
Lamp
Reset
Channel
Power/special functions
Rot. Rotating gobo fine
Calibration
Factory default
Touch calibration
11/107
OPERATION MANUAL
Lamp Control ON/OFF
Confirm
Reset All
Reset Pan/Tilt
Reset Colour
Reset Gobo
Reset Colour
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt speed, time
Color
Color Fine
Effect speed
Static gobos
Rotating gobos
Rot. rotating gobo
Prism
6 Prism rotation
8 Prism rotation
Frost
Zoom
Zoom fine
Focus
Focus fine
Autofocus
Shutter/strobe
Dimmer
Dimme fine
Internal motors (14)
Reload factory default
Touch red cross to
calibrate
001
255
BTX-TITAN