GB
Cleaning
1. Disconnect the light or the safety transformer from the mains power and secure it
from being switched on unintentionally.
2. Clean the halogen spotlight with warm water without cleaning agents using a
soft brush or cloth. Ensure that no moisture gets into the bulb housing.
Storage/Wintering
If frost is expected, then you must deinstall the halogen spotlight. Thoroughly clean
the device (see Cleaning). Check the garden and pond spotlight for damages. Store
the garden and pond spotlight in a dry and frost-free location. Children must not have
access to the storage location.
Disposal instructions
Dispose of your device in an environmentally responsible manner. Obtain information
concerning disposal from your local garbage disposal authority.
Repair /cable replacement
For repair/cable replacement, send the defective safety transformer or the defective
halogen spotlight directly to the supplier/manufacturer.
Available replacement parts can be found in the device overview.
Troubleshooting
Malfunction
Bulb is not
illuminated
Light performance
is decreased
Water in the
halogen spotlight
Light flickers
10
Directions for use
Possible cause
Power supply
interrupted
Dirt
Seal defective
Contacts have
corroded
Measure
Check power feed and fuse, check bulb,
and replace contacts if necessary
Cleaning
Check seal and replace if required
Clean the bulb pin
GB