Maintaining your washer
48 English
WA8700K_WA50K-03647A-03_EN.indd 48
2. Push the ends of each side of the case at
the same time.
When you feel the ends push, pull out
the dispenser drawer.
3. Remove the inserts from the 3
compartments. Rinse the inserts and
the drawer with warm water to remove
traces of accumulated laundry products.
4. To clean the drawer opening, use a
small, non-metal brush to clean the
recess. Remove all residue from the
upper and lower parts of the recess.
5. Return the inserts to the proper
compartments and replace the drawer
A
by placing the dispenser drawer rail (B)
B
on top of the compartment rail (A) (Tilt
the dispenser drawer downward and
insert it).
Then push the drawer in firmly and
slowly.
2016/7/22 10:19:36