Operating Procedure - Haier ESL-T21 Manual Del Usuario

English

Operating Procedure

1. Press power on button.
• The washer will now be in the working status in the Normal cycle.
• If the Start/Pause button is not pressed within 5 minutes after powering on the unit
it will automatically switch off and return to the stand by mode.
• The washer will also return to the stand by mode immediately after completion of
the wash process.
• Regardless of the settings by pressing the power on/off button all programs will
stop and return to the stand by mode.
• The washer has intelligent wash resumption. If the power was interrupted at the
power source and then when the power is resumed the washer will resume
working at the stopped position.
2. Selection of Cycles
• When the washer is powered on the Normal cycle is the default cycle. If other
cycle is required press the cycle button for desired program.
3. Process Select
• Once the power is switched on the washing machine will automatically set the
Normal cycle which will Wash, Rinse and Spin. If other selection combinations
are desired, press the Process Select button to choose.
Note: Spin shall begin after some time even if there is no water in the tub. Do not
use soak process for woolen clothes. Clothes prone to fading should be
washed separately.
7