Channel Plans - Promax TV EXPLORER HD Manual De Usuario

USER'S MANUAL. TV EXPLORER HD
NOTE:
The icon in the upper corner of a digital measurement screen states
that the signal level is higher than the minimum threshold (see the
PREFERENCES menu) but demodulator cannot lock it maybe due to some
wrong configuration parameter.
In such case, the user must press AUTO ID
NOTE:
In the case that is desired to explore or identify DVB-C signals will be
necessary to select previously a DVB-C standard as digital signal identifier
by means of
In order to identify DVB-S2 signals will be necessary to activate previously
the DVB-S2 option for digital satellite signals in the
PREFERENCES menu.

5.9 Channel plans

The signal automatic identification process as much as the exploration of the
frequency spectrum could yield the generation of new customised channel plans relative
to the usual work locations of the meter equipment.
In this way the characterisation of the band will be faster and easier when causing
that the equipment only analyses a shorter set of channels.
Whenever a new process of exploration is activated, the TV EXPLORER
analyses all the present channels in the active channel plan, which acts as pattern
channel plan specified by means of the option CHANNEL SET from configuration
measurement menu: CONFIGURATION
If during exploration or automatic identification process the TV EXPLORER
detects new parameters for some channel or frequency a new list will be generated with
the information updated and will be saved with the name of the original channel plan
followed by the extension: _0x. (See the following Figure).
11/2009
[22] PREFERENCES menu.
[17].
[25] key.
[22]
HD
HD
Page 35