Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
1.
If you experience difficulties with your kettle switching on and off during use
or switching off before boiling, check that the interior of the kettle is free from
lime scale build-up. (See "Cleaning your Kettle" section for more details about
decalcification.)
2.
If you see drops of water under your kettle this is just condensation.
WATER FILTER
1.
Your kettle is equipped with a water filter to prevent loose particles of scale
being poured into your beverage. This filter is both removable and washable.
Figure 2.
2.
The frequency with which you will need to clean any scale deposits from your
filter depends on the hardness of the water in your area and how often you
use the kettle.
3.
You should remove and clean the water filter when you notice any deposits
being left on the filter or if the pouring efficiency is impaired. Refer to the
"Cleaning your Kettle" section of this manual for more details on cleaning your
water filter and decalcification.
REMOVING THE WATER FILTER
1.
Allow the kettle to cool down completely.
2.
Disconnect the appliance from the outlet.
3.
Make sure that your hands are clean and free from soap, cream or anything
that might taint the water.
4.
Clean the water filter according to the directions listed in the "Cleaning your
Kettle" section of the manual.
CLEANING YOUR KETTLE
CAUTION: Make sure your appliance is unplugged and cooled down before
attempting to clean. To protect against electric shock, do not immerse cord, plug,
power base or unit in water or other liquid.
Exterior Cleaning
1.
The outside of your kettle can be cleaned by wiping the surface with a damp,
soft cloth, then dry thoroughly. Do not use harsh abrasives to clean the
exterior of the kettle, they will scratch the surface. CAUTION: Never immerse
the kettle in water or other liquid.
-7-
Publicidad
Tabla de contenido
