HealthSmart 523-1583-1900HS Manual De Instrucciones

Instructions
Handheld Shower Head
Item # 523-1583-1900HS
1. Unscrew original shower head from the shower
pipe using an adjustable wrench or pliers. Be
careful not to loosen opposite end of pipe in
wall.
2. Position the hex-nut bracket followed by a
rubber washer on the end of the hose. Pull the
hex-nut bracket over the washer. Check to
make sure the washer is positioned below the
threading. Make any necessary adjustments.
3. Attach the hex-nut bracket to the shower pipe
using an adjustable wrench or pliers.
4. Position the 1" chrome sleeve followed by a
rubber washer onto the end of the flexible
hose. Pull the chrome sleeve over the washer.
Check to make sure the washer is positioned
below the threading. Make any necessary
adjustments.
5. Secure the chrome sleeve onto the base of the
shower head. Turn until tight.
6. Using the included wall anchors and mounting
screws, attach the mounting bracket on the
wall at a height that is within reach. When the
bracket is mounted, the cutouts in the bracket
for the showerhead and hose should face up.
7. To use, rotate on/off switch on the back of the
shower head to desired position. Turn on water.
Tools Needed: Adjustable Wrench and Pliers
NOTE: If unable to mount the bracket with the
enclosed screws, heavy-duty double-sided tape
may also be used.
CAUTION: Double-sided tape can mar or cause
surface discoloration.