Information Codes - Samsung DW80K7050 Serie Manual De Instrucciones

troubleshooting

INFORMATION CODES

Code
OC
LC
4C
5C
HC
3C
DW7000KM-02025A-00_EN.indd Sec7:30
Over-level water check
• Functional check. Close the water supply valve and go to your house circuit
breaker panel, set the dishwasher's circuit breaker switch to o , and then
contact an authorized Samsung service center.
Leakage check
• If a water supply valve connection leak occurs, close the water supply valve
and go to your house circuit breaker panel, set the dishwasher's circuit breaker
switch to o , and then contact the installer to fi x.
If the problem continues, contact an authorized Samsung service center.
Water supply check
• Check if the water supply valve is closed, the water supply is suspended, or the
water inlet valve or line is frozen or clogged by foreign particles.
If the problem continues, close the water supply valve, and then contact an
authorized Samsung service center.
Drain check
After closing the water supply valve, check whether the drain hose is clogged or
•
folded. Also, check whether drain hole inside sump is clogged.
If the problem continues, contact an authorized Samsung service center.
High temperature heating check
The product ensure that the temperature for hot water line is not too high and
•
adjusts to appropriate temperature (120 ˚F (49 ˚C) - 149 ˚F (65 ˚C)) automatically.
If the problem continues, go to your house circuit breaker panel, set the
dishwasher's circuit breaker switch to o , and then contact an authorized
Samsung service center.
Pump operation check
Functional check. Turn o the dishwasher and try to start it again.
•
If the problem continues, contact an authorized Samsung service center.
English - 30
Action
5/2/2016 7:17:57 PM