Hitachi FCJ 65V Instrucciones De Manejo página 9

Material to be cut Material quality
General lumber
Lumber
Plywood
Iron plate Mild steel plate
Nonferrous metal Aluminium copper, brass
Phenol resin,
melamine, resin, etc.
Plastics Vinyl chloride,
acryl resin, etc.
Foamed polyethylene,
foamed styrol
Cardboard, corrugated
paper
Pulp
Hardboard
Fiberboard
Note
The minimum cutting radius of No. 21, No. 22 and No. 41 blades is 100 mm.
NOTE:
Due to HITACHI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
IMPORTANT
Connect connection of the plug
The wires of the mains lead are coloured in accordance
with the following code:
Blue: -Neutral
Brown: -Live
As the colours of the wires in the main lead of this tool
may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire coloured blue must be connected to the terminal
marked with the letter N or coloured black. The wire
coloured brown must be connected to the terminal
marked with the letter L or coloured red.
Neither core must be connected to the earth terminal.
NOTE
This requirement is provided according to BRITISH
STANDARD 2769: 1984.
Therefore, the letter code and colour code may not be
applicable to other markets except The United Kingdom.
Table 1 List of Appropriate blades
Blade No.
No. 11 No. 12 No. 15 No. 16 No. 21 No. 22 No. 41
10 – 55
5 – 20
5 – 20 Below 5 – 15
10 – 55 3 – 30
10 – 55 3 – 30
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 96 dB (A)
Measured A-weighted sound pressure level: 85 dB (A)
Uncertainty KpA: 3 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value: 12.7 m/s
Thickness of material (mm)
Below
20
Below
10
Below
3 – 6
3
Below
3 – 10
3
Below
5 – 15
5
Below
10 5
5 – 30 3 – 20 10 – 55
Below
3 – 20
5
Below
5
2
.
English
10 – 55 5 – 40 10 – 65
5 – 20 3 – 15 5 – 20
5 – 15 Below
5 – 15
6
5 – 20 3 – 15 5 – 20
3 – 40 10 – 65
10 – 55 3 – 40 10 – 65
7