Pioneer XW-BTSP70 Manual De Instrucciones página 9

Smart standby mode (disabled by default)
This mode enables the unit to come on automatically even if it is on
standby when a Bluetooth enabled device is connected or there is a signal
input through the AUDIO IN jack. This works only when the recharging AC
adapter is connected. To enable this feature, while the power is on, press
and hold the button for about 3 seconds until the power indicator blinks
orange twice. When enabled, the power indicator will light orange when
the unit is on standby. To disable this feature, press and hold the
for about 3 seconds until the power indicator blinks orange once.
0 To switch the unit to standby when smart standby mode is enabled, first
disable the connection with any Bluetooth enabled devices.
Multipoint feature
You can connect two Bluetooth enabled devices at the same time to this
unit.
0 When playing from one and you want to start play from the other, first
stop the device playing. Note that the multipoint feature does not work
together with the TWS feature.
0 To connect a third device, you must first disable the connection of one
of the connected devices.
Playing a device connected to the AUDIO IN jack
You can play the audio from an external player by connecting the audio
output jack of the player to the AUDIO IN jack of this unit using a stereo
mini plug cable.
0 Audio input automatically switches to AUDIO IN jack connection when
a cable is connected to the AUDIO IN jack. To play from a Bluetooth
device again after this, either remove the cable from the AUDIO IN jack
button or press the button to switch to Bluetooth playback.
En
9