Sony Bravia KDL-46R450A Manual De Instrucciones página 9

• Hold the Table-Top Stand with one hand to avoid it dropping when attaching.
• This TV is very heavy, so two people should place the TV onto thick and soft cloth.
• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).
• Be sure to securely tighten the supplied screws, otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the screws tightly without damaging the screw head.
• Please ensure the AC power cord is away from the Table-Top Stand installation location when
you attach the Table-Top Stand.
• When detaching the Table-Top Stand, reverse the attaching procedure. Do not remove any
screws other than those used when attaching the Table-Top Stand. Do not power on the TV with
its LCD panel facing down to avoid uneven picture uniformity.
9
US