How To Register The Headset On A Compatible Pc - HumanTechnik cm-BT Instrucciones De Servicio

BA_CM_BT_0407
How to register the CM-BT headset on a compatible PC
1 Switch on your PC and make sure that your Bluetooth hardware has been
activated.
2 Switch on the CM-BT headset.
4 Start your search for Bluetooth devices on the PC.
For more information, refer to the operating instructions for your PC
Bluetooth software.
5 Select the CM-BT headset from the list of devices found. To register the
headset and establish a connection between the CM-BT headset and the
PC, enter the following pass code: "0000".
➔
We recommend that you use the Bluetooth software/hardware
made by Bluesoleil on your PC. www.bluesoleil.com
We regret that we are not able to provide telephone support for
any problems you may encounter when operating this device with
your PC.
03.04.2007 8:49 Uhr
3 Activate the "register mode" for the CM-BT
headset by holding the function key pressed
down for 6 seconds (status indicator will
flash blue/red quickly)
Seite 25
English 25