Admiral AAW-05CR1FHU Manual De Uso Y Mantenimiento página 14

WAC 5 6 8 USER MAN final
OPERATING INSTRUCTIONS
➤CONTROL PANEL
You can easily operate this air conditioner by pressing relevant
button on the control panel as well as the remote control.
Button
The air conditioner will be started when it is energized or will
be stopped when it is in operation, if you press this button.
When the air conditioner is heating, allow 3 minutes after you
press this button.
Mode button
Each time Mode button is pressed, the operation
mode is changed in sequence:
5K 6K 8K cooling only
ENERGY SAVING
8K with heater
ENERGY SAVING
NOTE: After setting the mode, allow three (3) minutes before
NOTE: After setting the mode, allow 3 minutes before switching
switching to another mode. In the FAN ONLY Mode, Room
to another mode.
Temperature display range is from 0°C (32°F) to 38°C (99°F).
In the FAN ONLY Mode , Room Temperature display range is
Room Temperature below 32°F, the Temperature display L0.
from 0
(32 ) to 38 (99 ).
Room Temperature above 99°F, the Temperature display H1.
Room Temperature below 32 ,the Temperature display L0.
Room Temperature above 99 ,the Temperature display H1.
Fan Speed button
Used to select fan speed in sequence auto, low, medium
and high (low and medium are in same fan speed).
Timer button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.
When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the time LED displays the
If the OFF TIMER is set, the timer LED displays the
remaining time to turn off the unit for only 12 seconds, remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature. If you press
then LED shifts to display set temperature. If you press
TIMER button within the 12 seconds, OFF TIMER will be
TIMER button within the 12 seconds, OFF TIMER will be
cancelled.
canceled.
If the ON TIMER is set, the timer LED displays the
If the ON TIMER is set, the timer LED displays the
remaining time to turn on the unit. If you want to cancel
remaining time to turn on the unit. If you want to cancel
ON TIMER, press TIMER button.
ON TIMER, press TIMER button.
Button
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °F.
If the two keys are pressed at the same time, the temperature LED display will alternate between
NOTE: Temperature setting range is from 19
NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F).
3/2/05 12:23 PM Page 14
COOLING FAN ONLY
COOLING
COOLING FAN ONLY HEATING
COOLING
Indication symbols of LED on control panel :
Auto fan speed
Low fan speed
Medium fan speed
High fan speed
Above LED lights on when the relevant mode is in used.
Above LED lights on when
the relevant mode is in use.
(66 ) to 31 (88 ).
12
Control Panel
Fan
Timer
Speed
Mode
Airconditioner
Cooling
Fan only
Display set temp
Display set timer
Heating
Energy-saving
Timer
and
F
h
.