System Description; Product Specifi Cations - Jandy AquaPure Ei Serie Manual De Instalación Y Operación

Page 8
Section 2.

System Description

Heater
Pod
The cell and pod must be installed
as the last pieces of equipment in
the circulation plumbing system just
before the pool
Figure 1. Example of Installation
2.1 Product Specifi cations
Maximum Operating Pressure: 50 psi
Minimum Flow Rate:
Maximum Flow Rate:
Maximum water volume treated:
35,000 gal. (132,000 L)
Chlorine Output:
0.93 lbs. (0.42 kg) per day
Required Salt Level: 4,000 ppm (4.0 gpl)
Input Voltage: 120 V
Input Current @ 120 VAC: ~1.3 A
Input Freq: 47~63 Hz
Cell
Pool Return
152 lpm (40 gpm)
92 gpm (348 lpm)
Filter
Pool Intake
Spa Return
Output Voltage: 25V DC (max)
Output Current (adjustable by switch): 5A DC
Dimensions:
Power Pack (L x W x H):
10 in. x 4.5 in. x 13 in. (25.4 cm x 11.4 cm x 33 cm)
Electrolytic Cell (L x W x H):
6.5 in. x 5.5 in. x 12 in. (16.5 cm x 14 cm x 30.5 cm)
Pod (L x W x H):
6.5 in. x 5.5 in. x 6 in. (16.5 cm x 14 cm x 15.3 cm)
Weight:
Power Pack: 7 lbs. (3.2 kg)
Electrolytic Cell: 2 lbs. (0.9 kg)
Pod: 1.5 lbs. (0.7 kg)
Power Pack
To power outlet
Bonding Wire
(to Pump or
Heater)
Pump
Spa Intake