Pioneer SGX-CA900 Guía Rápida De Inicio página 13

8
Adjust the angle of the device,
and then tighten the bracket.
If the device is not aligned to the center
of the handlebars or not horizontal to
the stem, loosen the bolt and realign
the bracket.
After adjusting the angle, clamp the
temporary joint bolt and tighten the
bracket.
Use a tool that can measure the torque
to tighten the bolts.
• Tightening torque: 1.2 N·m
Installation on Your Bike
• Front view
• Side view
EN
13