Roav B2 Manual Del Propietário página 5

Specifications
Specifications are subject to change without notice.
Bluetooth pairing name: ROAV B2
DC input: 5V
Bluetooth version: V4.1, Class II
Bluetooth transmission distance: 33ft / 10m
Operation frequency: 2.402GHz-2.480GHz
Support format: A2DP v1.2/AVRCP v1.4/HFPv 1.6/HSP v1.2
Operating temperature range: 50°F to 104°F / 10°C to 40°C
Storage temperature range: -40°F to 185°F / -40°C to 85°C
Weight(Exclude packaging): 21.5g
Notice
This device in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. All
essential radio test suites have been carried out.
This product can be used across EU member states.
1.The product shall only be connected to a USB Interface of version 2.0
or higher.
2.The device complies with RF specifications when the device used at
20mm form your body
BT Operating Frequency Range: 2402~2480MHz
05 English
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. (4) Consult the dealer or
an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20cm between the radiator
and your body. This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
English 06