Manufacturer's Warranty - Hilti SID 4­A22 Manual De Instrucciones Original

Trouble or fault
The power tool or
the battery becomes
very warm.
10 RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances:
qr.hilti.com/r3357052.
There is a link to the RoHS table, in the form of a QR code, at the end of this
document.
11 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
Battery disposal
Improper disposal of batteries can result in health hazards from leaking
gases or fluids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical
tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local govern-
mental garbage disposal or public health and safety resources for disposal
instructions.
▶ Do not dispose of power tools, electronic equipment or batteries as
household waste!
12

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
30 English
Printed: 14.10.2019 | Doc-Nr: PUB / 5293888 / 000 / 06
Possible cause
Electrical fault.
The tool is overloaded
(application limits ex-
ceeded).
Action to be taken
▶ Switch the power
tool off immediately,
remove the battery,
keep it under obser-
vation, allow it to cool
down and contact
Hilti Service.
▶ Select a suitable
power tool for the
application.
2145524
*2145524*