Siesta R08019036598 Manual De Instrucciones página 5

1.0 OPERATING GUIDE
There are all together 14 keys on the ARCWA wired controller.
No KEY
1. ON/OFF
2. SLEEP
3. FAN
4. MODE
5. SET TEMP UP
6. SET TEMP DOWN
7. SWING
8. ON TIMER
9. OFF TIMER
10. TIMER ACTIVE
11. CLOCK
12. DAY
13. HOUR
14. MINUTE
Note : Override Function
Press the HOUR key once will activate the override function for 1 hour. An indicator "H1" will show
on the top left corner of the LCD. Press the same key again will increase the setting to 2 hours. An
indicator "H2" will be shown. Press the 3rd times increase the setting to 4 hours. An indicator "H4"
will be shown. Subsequent press will deactivate the override function.
When the Override function is activated, all the timers will bypassed and turn ON the unit for a fi x
periods of 1 hour, 2 hours or 4 hours depends on the selection, after which it will turned off.
On/Off the unit with overriding all the timer settings
Activate/deactivate Sleep function
Select Fan speeds control (Auto/High/Med/Low)
Select operating Modes control (Cool/Heat/Dry/Fan)
Increase set temperature in °C or °F
Decrease set temperature in °C or °F
Activate/deactivate Swing control.
Enable/disable the Event 1, 2 and 3 ON TIMER setting mode
Enable/disable the Event 1, 2 and 3 OFF TIMER setting mode
Activate/deactivate all set timers
Enable/disable the Real Time Clock (RTC) setting mode
a) Select the day for RTC or timer setting
b) Enable/disable FAN Key lock
a) Select the hour for RTC or timer settings
b) Set Override function for 1, 2 or 4 hours
a) Select the minute for RTC or timer settings
b) Enable/disable key lock
1
FUNCTION