Publicidad
Idiomas disponibles
Idiomas disponibles
g)
Do not switch on the disc saw as long as it is located in the workpiece. Only begin
to move the saw blade in the cut when the saw blade has reached full speed.
Otherwise the saw blade can be blocked, rebounds from the workpiece or causes a
kickback.
h)
Support slabs or big workpieces in order to reduce the risc of a kickback as a result
of a jammed saw blade. Big work pieces can bend under their own weight. The work
piece has to be supported at both sides of the saw blade both near the cut and at the
edge.
i)
Be very careful with "bag cuts" in existing walls or other non-visible areas. The saw
blade can cause a kickback when hitting a gas or water pipe, electric line or another
objects.
3.
T E C H N I C A L D E S C R I P T I O N
Your TS40 is a full electrical disc saw which is only to be used for cutting masonry, asphalt, stone and
concrete in industrial usage by trained personnel.
Water is absolutely required for cooling the motor.
The diamond saw blade consists of a prestressed metal disk which is at its circuit fixed with segments
made of a sintered mixture of diamond grains and metal powder.
The sawing process is introduced by dipping the saw blade into the material, which is to be cut. Move
the blade slowly forwards and backwards ober the work piece in order to execute the cut.
The machine may not be used for a different purpose or with a different tool.
3.1
Specifications
Rated Voltage
Rated Current
Power Input
Power Output
Frequency - Input
Frequency - Output
Speed (full load)
max. Cutting depth
Weight - Motor
Tool Fixture - Hole
max. Saw Blade Diameter
Strength of the saw blade core
Cooling water requirement at full load
Water protection class
3.2
Design
The complete sawing unit consists of the drive unit [1] with switching handle [2], adjustable handle [3]
and adjustable blade guard [4]. A bypass valve [12] which is arrange at the gear is changed when sawing
dry for changing the water flow away from the diamond saw blade. The TS40 is provided electrically via
the frequency converter FU6. TS40 and FU6 are water proof, i.e. on intended use no water can enter
the motor.
3.3
Scope of delivery
Diamond hand saw with blade guard, ball valve and plug nipple, wrench SW 17, face spanner, adapter
cable (CEE-socket/shock-proof plug) and operators manual.
3.4
Noise emissions and vibration (EN 50144)
The typical A-rated sound pressure level is 86 dB(A).
The typical A-weighted sound capacity level is 99 dB.
The typical rated acceleration is 2,5m/s².
V
A
W
W
Hz
Hz
1/min
mm
kg
mm
mm
mm
l/min
12
230
400
16
13,5
3700
6500
2700
4800
50 - 60
930
2500
165
9,4
25,4
400
1,5 - 2,5
1
IP 55
Publicidad
