Installation and connection
Examine your microwave oven
Unpack the oven, remove all
packing material, and examine the
oven for any damage such as dents,
broken door latches or cracks in the
door. If you find any damage, notify
your dealer immediately. Do not
install a damaged microwave oven.
Earthing instructions
Important!
THIS UNIT HAS TO BE
PROPERLY EARTHED FOR
PERSONAL SAFETY.
Placement of your oven
This oven is intended for counter-top
use only. It is not intended for built-in
use or for use inside a cupboard.
1. Place the oven on a flat and
stable surface more than 85 cm
above the floor.
2. For proper operation, ensure a
sufficient air circulation for the
oven.
Counter-top use:
Allow 15 cm of space on the top
of the oven, 10 cm at the back
and 5 cm on both sides.
5 cm
If one side of the oven is placed
flush to a wall, the other side or
top must not be blocked.
3. When this oven is installed, it
should be easy to isolate the
NN-E22JMM_EPG.indb
7
15 cm
10 cm
5 cm
7
If your AC outlet is not earthed, it is
the personal responsibility of the
customer to have it replaced with a
properly earthed wall socket.
Operation voltage
The voltage has to be the same as
specified on the label on the oven.
If a higher voltage than specified is
used, it may cause a fire or other
damages.
appliance from the electricity
supply by pulling out the plug or
operating a circuit breaker.
4. Do not place this oven near an
electric or gas cooker range.
5. The power cord should not
touch the outside of the oven.
Keep the cord away from hot
surfaces. Do not let the cord
hang over the edge of a table or
work top. Do not immerse the
cord, plug or oven in water.
6. The feet should not be
removed.
7. This appliance is intended to be
used in household and similar
applications such as:
- staff kitchen areas in shops,
offices and other working
environments;
- farm houses;
- by clients in hotels, motels
and other residential
environments;
- bed and breakfast type
environments.
Do not use outdoors.
EN
2018/01/30
13:48:02