Topcom WBR 611 Manual De Usuario página 9

WBR611.book Page 9 Wednesday, April 14, 2004 3:54 PM
• Now you can change the LAN settings:
- Click Next to proceed
• Now the WBR611 will try to detect your broadband connection type
• Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto
detection has been successful )
- Select your Connection Type
- Click Next to proceed
- Obtain IP automatilally (DHCP client) : this connection is mostly used for connecting the WBR611 to a cable
modem.
- Fixed IP address : for connections with fixed WAN IP address.
- enter the WAN IP , Subnet Mask , Gateway and DNS addresses.
- Click Next to proceed.
Topcom Wireless Broadband Router WBR 611
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
9