5.
CHARGING
IMPORTANT! CHARGE THE FLARE IMMEDIATELY AFTER PURCHASE, AFTER
EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will reduce the
battery's capacity and may void the warranty.
5.1 The Flare may be charged using either a 12V car charger or AC wall charger
(included).
5.2 Connect the micro USB end of the charging cable to the micro USB port of the
Magnetic Connnetor Hub.
5.3 Insert the USB end of the cable into the USB port on the wall charger or car
charger.
5.4 Connect the Magnetic Connector Hub to the Flare, aligning the (+) and (-) terminal
symbols on each. The magnet in the center will keep the two items connected.
5.5 Plug the 12V or AC charging adapter into either a 12V power receptacle or a live
AC wall outlet.
5.6 LED indicators
• Red LEDs on the wall charger and magnetic connector hub indicate charging.
• Green LEDs on the wall charger and magnetic connector hub indicate
completed charge, misaligned terminals or reverse polarity.
5.7 Recharge the flare after use, and at least every 6 months.
6.
OPERATING INSTRUCTIONS
6.1 Using the magnet on the back, attach to any magnetic metal surface.
6.2 The LED Road Flare is waterproof. It may be safely used for marine applications and
in wet environments, and submerged to a depth of 33 feet. It will float unless secured.
6.3 Press the ON/OFF button to rotate through the following 9 light patterns:
1. Rotate
2. Quad flash
3. Single blink
4. Alternating blinks
5. SOS rescue (Morse code)
6. Steady on: high
7. Steady on: low
8. 2 LED Flashlight
9. 4 LED Flashlight
10. OFF
• 5 •