Hella Rallye 3003 Instrucciones De Montaje página 17

Electrical
connection, page 4
Install the relay with the
connection terminals
facing downwards and
splash-proof. If required
and permitted by legal
Have the driving lamps
set by a specialist garage
Another tip:
• Always keep headlamp
lenses clean. Dirt can
swallow up to 80% of
light power. You drive
safely when you can
see and be seen well.
Do you carry spare
17
regulations, install a
switch on the dashboard.
Disconnect the battery
ground cable (-) for
safety reasons.
Route and connect the
cables according to the
circuit diagram. When
wired according to circuit
or at a service station.
Only correctly set
bulbs and fuses in
your vehicle?
• Correctly re-install all
the removed parts.
If you have any
questions or installation
problems, please call
the Hella Service,
diagram I the auxiliary
lamps are switched on
together with the existing
driving lamps. According
to circuit diagram II the
auxiliary lamps are switched
in addition to the existing
headlamps via a separate
switch. According to circuit
headlamps ensure
optimum light.
wholesealer,or return
to your garage.
• Outside normal working
hours an answering
machine will record your
inquiries and requests
and Customer Services
will then get back to you.
diagram III the CELIS®
position lamps are
connected and switched
on together with the
parking light. Fasten the
supply cables securely in
place.
Ask your dealer for
the complete Hella
brochure or write to:
Hella KGaA
Hueck & Co.
59552 Lippstadt/
Germany