Maintenance And Care - Schumacher PC-6 Manual Del Usuario

Convertidor de potencia ca en cc

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

SAVE THIS OWNER'S MANUAL AND READ BEFORE EACH USE.

Model PC-6: This manual will explain how to use the converter safely and effectively.

Please read and follow these instructions and precautions carefully. This manual also

contains important safety and operating instructions for AC-DC Converter.

CAUTIONS:

• For Indoor use only. Do not expose

converter to rain or snow.

• Do not open unit; risk of electrical shock.

• The 12 volt socket is wired so the center

conductor is positive (+) and the outer sleeve

is negative (-). Please confirm that the 12V

plug being used is wired the same way.

• Must use a heavy duty #18 AWG extension

cord – 50 foot maximum length.

• Do not put fingers into 12V receptacle.

• To insure proper ventilation, always rest

unit on its base.

• Unit gets hot - do not set converter on

flammable materials like carpeting,

upholstery, paper, cardboard, etc.

• To reduce risk of electrical shock, unplug

the converter from the 120V AC electrical

outlet before attempting any maintenance

or cleaning.

• Do not operate the converter if it has a

damaged power cord or plug. Have the

cord replaced.

• Never pull out the plug by its cord when

unplugging the converter. Pulling on the cord

may cause damage to the cord and/or plug.

• Never operate converter if it has been

dropped or otherwise damaged. Take it

to a qualified professional for inspection

and repair.

• Do not disassemble converter. Take it to

a qualified service professional if service

or repair is required. Incorrect assembly

may result in fire or electrical shock.

Using your AC to DC Converter:

• Plug converter into a 120V AC outlet. The

Green "Power ON" LED will illuminate

when properly functioning.

• Insert 12V accessory plug into converter's

socket (maximum 6 Amps or 72 Watts).

Disconnecting your AC to DC

Converter:

• Remove the 12V plug from the converter.

• Disconnect converter from the 120V AC

outlet.

• Let converter completely cool before

storing.

Troubleshooting

Check items below if appliance is not

functioning:

• Confirm converter's green light is ON. If

not, confirm the AC outlet is live. If AC

outlet has no power, check wall switches,

breakers and fuses.

• If green light is On and appliance is not

functioning:

1. Remove and re-insert the appliance's

12V plug into the converter's 12V

socket to ensure good connection.

2. Verify appliance is functioning by

plugging into a vehicle's 12V cigarette

lighter socket/12V accessory port.

3. Check appliance fuse (either in 12V

plug or in appliance).

• If green light is on, but goes out when

appliance is plugged in; the converter

is over-loaded. Check the appliance's

power consumption requirements.

• If unable to resolve issue, do not return

to store. Call Customer Ser vice at:

1-800-621-5485.