Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
temperature measured at the time the unit is connected or power is restored.
The LED default setting for the set operating temperature is 50
power failure has occurred, the previously set temperature is automatically erased
and will have to be reset.
The LED default setting for temperature selection (
SETTING
OPERATING
temperature:
1. Press and release either of the +/- temperature keys.
The LED display will temporarily reveal the flashing set temperature for
approximately 5 seconds. If you fail to set/change the operating temperature
within this 5 second period, the LED will automatically revert back and display
the internal (cabinet) temperature.
2. Each time you press the +/- keys during flashing mode will change the
temperature incrementally by 1
o
o
6
C~14
C). The operating temperature will flash in the LED display for
approximately 5 seconds after the selection is made, then revert back to
display the internal cabinet temperature.
TEMPERATURE SELECTION (
TEMPERATURE:
o
(Temperature ranges between 43
o
o
F/
C): This unit can display temperatures on the
o
F/10
o
o
o
F/
C) is
F (Fahrenheit Scale).
To
set/change
the
o
C. After a
operating
o
o
F ~ 57
F /
Publicidad
Tabla de contenido
