Set Up Instructions - Matco Tools SL360MDLX Manual Del Usuario

2.3 DO NOT expose to temperatures above 140°F (60°C).
2.4 Replace the battery pack ONLY with one designed for this product.
2.5 Recycle or dispose of the used battery as required by local regulations.
2.6 If the electrolyte in the cells gets on your skin, wash thoroughly with soap
and water. If it gets into your eyes, rinse thoroughly with cool water and seek
immediate medical attention.
2.7 This product contains a lithium ion battery. In case of fire, you may use water, a
foam extinguisher, Halon, CO
or soda (sodium carbonate) to extinguish the fire. Once the fire is extinguished, douse
the product with water, an aqueous-based extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the battery from re-igniting. NEVER attempt to
pick up or move a hot, smoking, or burning product, as you may be injured.
3.

SET UP INSTRUCTIONS

3.1 Remove any cord wraps and uncoil the cable between the charger and the work light.
4. FEATURES
1
4
5
1. Horizontal magnets
2. Charging status LED indicators
3. Charging socket
4. Rotating (360°) hooks
5. 3W end LED
6. 16 SMD LED lights
, ABC dry chemical, powdered graphite, copper powder
2
3
2
6 7
9
8
ON/OFF power button
7.
8. Vertical magnet
9. 100V~240V AC wall charger
with USB port
10. USB/Micro USB charging cable
11. 12V DC car charger
• 4 •
11
10