NEO PSU Manual De Instrucciones página 2

4 Setup – Getting Started
4 Speed Adjustment
5 Adjusting the Speed
5 Factory Settings
5 Measuring the Speed
6 Warnings
6 Neo Specifications
The Neo PSU is compatible with the following Rega models:
3 English
7 Français
P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition
/ RP8 or any older Rega turntable fitted with the aftermarket 24 V
11 Deutsch
motor upgrade kit.
15 Italiano
19 Español
WARNING: Only use the supplied PS1 AC adaptor.
23 Português
NEVER connect a power adaptor to the turntable and another to the
27 Nederlands
Neo simultaneously.
31 Dansk
35 Svenska
The original power adaptor supplied with your turntable is no longer
39 Polski
required when you connect the Neo.
WARNING: Connecting two power AC adaptors may cause serious
damage.
Connect the turntable using the supplied DIN lead between the rear
of the Neo and the rear of the turntable.
Make sure the PS1 AC adaptor is plugged in and connected to the
24 V AC input socket on the back of the Neo.
3