Beper 90.114B Manual De Instrucciones página 10

Electronic kitchen scale - Use instructions
TO INSTALL AND REPLACE BATTERY
When the scale does not turn on anymore or the LCD shows "LO" or if does not
work correctly, that means that the battery is low. Replace it with new one.
Insert the battery in the case respecting the correct polarity.
A bad use can cause damages to the scale.
Low battery become dangerous for the possible loss of very corrosive liquid. To
avoid any damage, replace the battery as soon as necessary.
If the scale is not used for a long period, it is recommended to remove battery
from the case, in order to avoid damages with the corrosive liquid into the scale.
EVERY DAMAGES CAUSED BY BATTERY LIQUID WILL VOID THE WARRAN-
TY.
ATTENTION:
When the display shows 'EEE', it means that the limit weighing has been over-
come.
CLEANING:
For the cleaning of the scale, pass a soft cloth on the surface scale. Don't use
soap or other chemical products.
Keep away the scale from water and other heat sources.
Technical data
High precision stain gauge sensor system
Unit of measures: kg/lb: oz
Capacity: 5kg
Division: 1 g
Unit of volumes: ml, fl:oz
Tare function
Auto power off
Low battery and over load indication
Free switch within two different units: g, lb: oz, ml, fl.oz
Powered by 3xAAA (not included)
For any improvement reasons, Beper reserves the right to modify
or improve the product without any notice.
10