Problems - Sagem Photo Easy 255 Manual Del Usuario

P
ROBLEMS
Remark : The printer is fitted with an automatic time-out to prevent overheating, this can be
tripped when performing large print jobs. The printer automatically restarts the
current print job as soon as the temperature drops back to normal.
No mains supply
(indicator lamp off)
An error message is
displayed on screen
The printer was
unplugged during a
print job
No photograph is
printed on a sheet
The photograph is
marked
with a continuous line
or a lot of spots
No PC printing
P
ROBLEMS
• Check that the power supply block is correctly plugged
into the mains.
• Check that the power supply connector is correctly
plugged into the printer.
• Checkthat the mains socket is live (check fuses and/or
circuit breakers of your installation as necessary).
• Refer to the error message table (refer to the paragraph
Error messages, page 29).
• Set the printer on/off switch to O and then reconnect the
mains lead.
• Switch on the printer and wait for the initialisation phase
to be completed.
• If a sheet of paper is jammed, carry out the procedure
(refer to the paragraph Paper jam, page 27).
• Restart printing.
• Are you using sheets that meet the technical
specifications (refer to the paragraph Technical data,
page 31).
• Have the sheets been inserted shiny face up?
• Clean the printhead (refer to the paragraph Cleaning the
print head, page 26).
• Check that the USB cable is correctly connected.
• Is the printer driver installed?
S
OLUTIONS
- 28 -