Mx Onda MX-TC2215 Manual De Instrucciones página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. At any time you can stop the toasting time, for it just press the button to
cancel 4 (Cancelar).
Attention:
• When the toaster is unplugged, if you operate the ignition lever 2 is not
will remain on hold.
• During the roasting process or immediately after the end of this, careful
not to touch the metal surfaces of the toaster as being very hot it could
cause burns.
Reheating function
This function allows you to reheat the slices of bread once they have been
toast, for this follow the following process:
1. Bread slices should be in slot 1.
2. Press the ignition lever 2 down until it reached the top, the power indicator
4 will light.
3. Press the reheat button 5 (Recalentar) and indicator lights.
4. After approximately 30 seconds, the lever 2 is released automatically.
Bread slices will be ejected while the toaster is switched off and the power
indicators 4 and reheat 5 turn off.
5. At any time you can stop the reheating function, for it just press the button
to cancel 4 (Cancelar).
Note:
The duration of reheating time will always be about 30 seconds, regardless
of the position in which the selector 3 is toasting time.
Defrost function
This function allows you to defrost the bread. To proceed to defrosted, proceed
as follows:
1. Insert in slot 1 frozen bread slices.
2. Turn the toasting time selector 3 according to your preference, but note
that the defrost function, increases the time normal roasting. We
recommend starting with short times.
3. Press the ignition lever 2 down until it reached the top, the power indicator
will light 4.
4. Press the button to unfreeze 6 (Descongelar) and the corresponding
indicator lights.
5. After the previously set for defrosting time, the lever 2 is released
automatically. Bread slices will be ejected while the toaster is switched off
and the power indicators 4 and defrost 6 turn off.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido