Special Safety Instructions For This Unit; Description Of Parts / Supplied Parts; Intended Use; Unpacking The Appliance - Profi Cook PC-FW 1003 Instrucciones De Servicio

insufficient knowledge and/or experience, un-
less they are supervised by an individual who
is responsible for their safety or have received
instructions on how to use the device.
• Children should be supervised at all times in
order to ensure that they do not play with the
device.
Special safety instructions
for this unit
WARNING: Risk of injury!
• Before replacement of accessories or ad-
ditional parts which move during operation, the
device must be switched off and cut off from
the mains.
• Do not touch moving parts.
• Before changing accessories, wait until the
knife has come to standstill.
• Before switching on, make sure that the
accessories attachment has been installed
correctly and is seated securely.
• Always use the supplied tamper. Never insert
your fingers or tools into the filling neck!
• Handle the knife with the necessary care when
taking out and cleaning it!
• Do not break up hard items such as bones or
shells.
• Do not manipulate safety switches.

Description of Parts / Supplied parts

1 Filling tray
2 Motor
3 Switch / /R (On/Off/reverses)
4 Screw
5 Scroll housing
6 Pusher
Illustrations A to D on the last page:
7 scroll
8 Knife
9 3 Sieve (fine, medium, coarse)
10 Plug
11 Sausage attachment
36
12 2-part "Kebbe" attachment
13 2-part cookie attachment
14 Rail for biscuits

Intended use

This appliance serves
• Cut up foodstuff.
• You can shape noodles or dough with different
attachments.
It is exclusively intended for this purpose and may
be only used appropriately.
It may only be used in the manner described in
these operating instructions.
You may not use the appliance for commercial
purposes.
Use for any other purpose is considered improper
and not for the intended purpose and can result in
damage to property and personal injury.
The manufacturer shall not be liable for damages
caused by not intended use.

Unpacking the appliance

1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.

NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under "Cleaning".

Preparation

Please see the overviews on pages 3 and 74.
1. Open the fixture for the spiral housing with the
screw (4) on the device.
2. Place the spiral housing (5) with the filler neck
facing upwards into the spiral drive and turn the
screw clockwise until it is closed.
3. Place the filling tray on to the filler neck in such
a way that the fixture for the tray is above the
motor block.