Página 3
This manual includes the manufacturer’s recommended safeguards and all the information needed to connect your IPTV receiver to both your in-home IP network and your entertainment system. The safety and installation information was developed and provided primarily by the receiver manufacturer, ARRIS Enterprises, Inc. VIP2262 Installation Guide...
Introduction Congratulations on choosing the ARRIS VIP2262 IP TV Receiver. ARRIS IP TV Set-top Boxes represent the latest in home entertainment. It starts with your VIP2262 IP Set-top TV Box. ARRIS IPTV enables you to enjoy television like never before.
Item Function POWER Press to turn the VIP2262 on or off. The LED (just to the left of the POWER key) lights green to indicate the unit is powered on and active. When active, LED flashes each time you press a key on the remote control.
Overview Rear Panel The rear-panel components of the VIP2262 are shown in the following illustration and described in the table below. Item Function HPNA Coaxial input for digital signal from your service provider OPTICAL Toslink (S/PDIF) digital audio output to a compatible TV or...
• High-Definition TV (HDTV) • Home Theater Receiver–Audio Connection Options The VIP2262 offers the following video outputs: HDTV HDMI or Component video Standard Composite video To determine the available inputs on your TV, check the manual supplied with the TV or on the TV itself.
HDMI connection carries both video and audio signals. • If your HDTV has component video, connect component video cables to the Y, Pb, and Pr connectors. Component video carries video signals only. To connect the audio, refer to the following page. VIP2262 Installation Guide...
OUT L and R connectors. In most cases, S/PDIF offers better audio quality, including support for Dolby Digital 5.1 Surround Sound. HDMI carries video and audio. If you connect your HDTV using HDMI, no additional audio connections to the TV are necessary. VIP2262 Installation Guide...
If your equipment supports it, use the OPTICAL S/PDIF output instead of the AUDIO OUT L and R connectors. In most cases, S/PDIF offers better audio quality, including support for Dolby Digital 5.1 Surround Sound. For more information, see Connection Options on page 4. VIP2262 Installation Guide...
Mute button has not been pressed. Verify that you have the correct cables for the audio ports. Verify that the audio cables are firmly connected between the IPTV Receiver and the audio playback device (TV, home theater receiver, etc.). VIP2262 Installation Guide...
According to 47 CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers, ARRIS Enterprises, Inc., 6450 Sequence Drive, San Diego, CA 92121, 1 800 225 9446, declares under sole responsibility that the product identifies with 47 CFR Part 2 and 15 of the FCC Rules as a Class B digital device.
Página 14
THIS LICENSE SHALL TERMINATE AUTOMATICALLY if you fail to comply with the terms of this License. ARRIS is not responsible for any third party software that is provided as a bundled application, or otherwise, with the Software or that is downloaded to, or otherwise installed on, the Product.
Página 15
Open Source Attributions ARRIS IPTV Set-top Model VIP2262 For instructions on how to obtain a copy of any source code being made publicly available by ARRIS related to software used in this ARRIS product you may send your request in writing to: ARRIS Enterprises, Inc.